Help needed to Block sites on a certain IP range.

Status
Not open for further replies.

ILHFFS

Active Member
1,110
2010
272
10
I have two internet connection and both have dynamic address.

One connection is personally used by me and other connection uses by some more person.

So I would like to do one thing. Is there is any way through that I can block some sites to access from one of my connection which is used by some more person.

Suppose one of my dynamic address started with - 243.xxx.xxx.xxx
(Personally Used) I don't block any site when this connection active.

And other one dynamic address started with - 179.xxx.xxx.xxx
(Used By Many Person) I want to block some sites when this connection active.

Thanks and regards.
 
5 comments
you can either try flashing your router with s.th. like tomato (if it works)
or use pfsense, endian etc.
There you can configure 2 WAN-Adresses & route specific PCs through specific WAN-Ports.

or even "merge" them to a bigger Internet-Connection
 
Define Access Control for Specific Folder or Site

Log on to the Web server computer as an administrator.
Click Start, point to Settings, and then click Control Panel.
Double-click Administrative Tools, and then double click Internet Services Manager.
If you want to limit access for the whole site, select the Web site from the list of different served sites in the left pane.

If you want to limit access only for a specific folder, click the folder you want to control.
Right-click the Web site or folder, and then click Properties.
Click the Directory Security panel.
If you want to limit access to a specific set of sites but deny access to all other sites, click Denied Access.
If you want to grant access to all clients by default but exclude a specific list of clients, click Granted Access.
To update the list of hosts or domains in the Except list, click Add.
To add a single computer to the list, click Single computer, type the IP address in the appropriate box, and then click OK.
To add a range of computers in a specific address range, click Group of computers, type the IP address for the network in the appropriate box, type the subnet mask for the network range you want to configure, and then click OK.
To add computers by their identified domain name, click Domain name, and then type the domain name in the appropriate box.
Click Properties, type the domain name, and then click OK.
Click OK, and then click OK.

Or else you can visit here to blog certain websites such as facebook
http://www.petri.co.il/how-to-block-websites-ip-address.htm
 
You could use .htaccess or you could also use APF if you are the server administrator. If your utilizing CPanel you can login to cPanel and protect the directories there.
 
Status
Not open for further replies.
Back
Top